ADJUSTED TWIST DRILLS SHORT SERIES
Chuck bits and accessoriesIn HSS, adjusted drills. Cylindrical shank, 118°...
In HSS, forged, rolled tips. Cylindrical shank, 118° cutting angle, burnished finish. In accordance with DIN 338 standards, diameter tolerance h8. Suitable for drilling of all the metals in general, iron, non-alloy steel construction with a tensile strength up to R: 600 N/mm2. It is recommended the use of tips lubricating, where possible, with cutting oil or emulsion.
Description | L1 mm | L2 mm | Ø mm |
---|---|---|---|
Z-PUNTE HSS CORTE HILLS 1,5 | 40 | 18 | 1,5 |
Z-PUNTE HSS CORTE HILLS 2 | 49 | 24 | 2 |
Z-PUNTE HSS CORTE HILLS 2,25 | 57 | 30 | 2,5 |
Z-PUNTE HSS CORTE HILLS 3 | 61 | 33 | 3 |
Z-PUNTE HSS CORTE HILLS 3,5 | 70 | 39 | 3 |
Z-PUNTE HSS CORTE HILLS 3,75 | 70 | 39 | 3,75 |
Z-PUNTE HSS CORTE HILLS 4 | 75 | 43 | 4 |
Z-PUNTE HSS CORTE HILLS 4,5 | 80 | 47 | 4,5 |
Z-PUNTE HSS CORTE HILLS 5 | 86 | 52 | 5 |
Z-PUNTE HSS CORTE HILLS 5,5 | 93 | 57 | 5,5 |
Z-PUNTE HSS CORTE HILLS 5,25 | 86 | 52 | 5,25 |
Z-PUNTE HSS CORTE HILLS 6 | 93 | 57 | 6 |
Z-PUNTE HSS CORTE HILLS 6,5 | 101 | 63 | 6,5 |
Z-PUNTE HSS CORTE HILLS 7 | 109 | 69 | 7 |
Z-PUNTE HSS CORTE HILLS 8,5 | 117 | 75 | 8,5 |
Z-PUNTE HSS CORTE HILLS 9 | 125 | 81 | 9 |
In HSS, adjusted drills. Cylindrical shank, 118°...
Twist cylindrical rolled drills with reduced tang...
Titanium nitride coated bits last up to six times...
Special super fast "HSS" 5% cobalt steel drills...
In HSS, adjusted drills. Cylindrical shank, 118°...
Twist cylindrical rolled drills with reduced tang...
Titanium nitride coated bits last up to six times...
Special super fast "HSS" 5% cobalt steel drills...
In HSS, adjusted drills. Cylindrical shank, 118°...
Twist cylindrical rolled drills with reduced tang...
Titanium nitride coated bits last up to six times...
Special super fast "HSS" 5% cobalt steel drills...