ELETTROPOMPA AUTOADESCANTE PER TRAVASO LIQUIDI - SERIE PROFESSIONALE

SELF-PRIMING ELECTRIC PUMP FOR LIQUID TRANSFER - PROFESSIONAL SERIES

The best solution for aspiration and dispensing liquids thanks to the strong self-priming capability, and the possibility to operate with discontinuous presence of liquid in the suction and to the reversibility of the flow. The particular tight structure of the body pump prevents contact between the liquid and the engine part and prevents losses. The ENM series is intended for professional use or for heavy-duty applications. Can be equipped on demand for various types of seals and manual by-pass for the adjustment of capacity and hydraulic head. They are used in agriculture, nautical sector, industry etc.. FEATURES: 6 meters height of priming, possibility of flow reversal, single-phase induction engine, IP 44 protection, with a professional rotary inverter cable. Continuous service. The pumps are supplied with one straight fitting and one curved fitting. FLUID SPECIFICATIONS: maximum temperature 90° C, max density 1,1 g/cm3, without hard particles (eg. sand), not too viscous, examples: fresh water, sea water, gasoline, oil, pesticides, etc.. Do not use gasoline, solvents and, in general, in places with risk of explosion and fire. Pump body: Bronze. Impeller: bronze. Steel shaft: AISI 316. Counterflange: stainless steel AISI 304.

Information request

Technical Data

Description	R/min	HP	Volt
Z-PO-ELETTROP.TELLAR. ENM 20 HP 0,3	2800	0,3	230 - 50Hz
Z-PO-ELETTROP.TELLAR. ENM 25 HP 0,5	1400	0,5	231 - 50Hz
Z-PO-ELETTROP.TELLAR. ENM 30 HP 1	1400	1	232 - 50Hz
Z-PO-ELETTROP.TELLAR. ENM 35 HP 1	1400	1	233 - 50Hz
Z-PO-ELETTROP.TELLAR. ENM 40 HP 1,2	1400	1,2	234 - 50Hz